I'm helping a friend DIY a reverse camera install into her 2010 Honda Fit.
There's two wires from the back camera that need to be connected to the car:
There's a red/black dual wire from the back camera which needs to be connected to the reverse light. Feeding into the reverse light are green and black wires. youporn.wiki/ xhamster.vip/ redtube.onl/
I've found conflicting advice on whether the red/black dual wire from the camera should connect to the green or black wire feeding into the reverse cam.
There is also a singular red wire from the back camera that I believe needs to be run to a ground source.
There's been conflicting advice, so would love to hear from anyone who has done an install on a Honda Fit specifically.